The CADEX CPB23.35 1-3/8” 23 Gauge Headless Pinner & Brad Nailer with Starter 6000 has a built in air duster. It will drive 23 gauge headless brads ranging in size from 1/2 inch to 1 3/8 inch long. This is a great tool for painters because with the headless brads, there is very little need for filling. It leaves a smaller indentation than an 18 gauge pinner, yet still provides more than ample holding power. You can also use it in many cases in place of clamps, when you’re gluing up a project.
The CADEX CPB23.35 is, for all its power, very light weight. The balance is well distributed, so that you won’t get as tired when working over your head. In addition, the precision tip is fine and allows for easy view of your target area, with easy aiming, too. It will work well with your ½ horsepower compressor.
The CADEX CPB23.35 is great for providing [...]
The DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer is a finish nailer that is functional with and without oil. This gives you flexibility in the types of jobs you complete, without fear of getting oil on your finished cabinetwork and trims.
The DEWALT finish nailer operates with between 70 and 120 PSI. It will drive 1” to 2 ½”, 15 gauge nails cleanly into even hardwoods used in cabinetry and trim. The magazine is at 34 degrees, and features tool-less adjustment for the depth-of-drive and 360 degree adjustable exhaust.
The DEWALT D51276K finish nailer has a front opening, so that you can clear jams easily, helping to prevent down-time on the job site. The tip has a non-marring pad, and maintains a low profile, making it an easy fit for tight work spaces. The trigger is also sequential action.
This brad nailer is intended for use in finish carpentry on trim, baseboards, crown molding, cabinets, [...]
The Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer will finish out your home projects easily and quickly. Its magnesium chassis is lightweight, yet durable, and with the oil-free mechanism and quick-load nail magazine, you’ll find it very easy to use. It also has tool-free adjustment, allowing you to adjust depth-of-drive in a flash and providing quick transition to different work surfaces, whether it is furniture or molding.
Your DIY projects will benefit from the professional look provided by the N62FNK-2. It easily handles the small details that make your home a showpiece. It works with your standard compressor to apply door trim, window trim, crown molding, or to complete furniture construction. You can also choose one of 4 tips to fit different profiles, ensuring perfect nail drive with each firing. With its oil-less operation, you won’t have to worry about it staining your work surface.
You’ll also enjoy the tool-free adjustment on the N61FNK-2. The [...]
The Black & Decker 18-Volt 18-Gauge Cordless Brad Nailer is a finish nailer designed for professional and DIY carpenters. It’s designed to work on cabinet installation, reupholstery projects, and fence installation. The Black & Decker Firestorm features a mar preventing tip to protect the work surface. This is a cordless nailer that operates with an 18 volt, rechargeable battery. The freedom from air hoses and extension cords makes the Black & Decker Firestorm much easier to use, with no cords and hoses to get tangled up on the worksite.
The Black & Decker FS1802BNB Firestorm 18-Volt 18-Gauge Cordless Brad Nailer uses nails from 5/8” to 2” long, and the battery will last through 500 nails. There is an easy-read electronic indicator that tells you when either the battery or nail magazine is getting low, which will help you keep your pace more easily. It has a jam clearing mechanism that is tool-free, making your time on [...]
The Senco PC0947/FP18KIT 18-Gauge Brad Nailer Compressor Combo Kit is an 18 gauge finish nailer that comes equipped with its own compressor. The 1 gallon compressor is an aluminum cylinder with a steel sleeve. The compressor weighs 20 pounds, so it’s very easy to transport. The compressor is also oil free.
The Senco Brad Nailer includes everything necessary for trim and finish jobs. It has an operating pressure of between 70 and 95 psi, and will sink 18 gauge nails ranging from 5/8” to 2” long.
The PC0947 Brad Nailer Compressor Combo Kit is a finish nailer that works well with interior trim, chair rail installation, and installation of other trims such as baseboards, crown molding, and bookshelves. It also works well installing exterior trim.
This user friendly air nailer features an adjustable exhaust and depth of drive, and has a belt hook, too, making it easy to carry it with you or hook onto a ladder. You [...]
The Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner is a finish nailer designed for detailed woodwork involving thin, delicate wood pieces with no splitting. The Grex will use up to 1 3/8” pins, providing strong hold. It has a self adjusting magazine to accommodate different sizes of fasteners, so you won’t have to make the adjustments yourself, saving time on the jobsite. The Grex Pinner has a double trigger safety, and easily penetrates hardwoods with no splitting.
The Grex Pinner has an industrial grade motor, affording it the power to pin hardwoods like beech and oak. However, even though the industrial grade motor is strong, the Grex Pinner can fasten delicate and thin wood without splitting them. The easy load magazine offers convenient and fast loading. The finish nailer has broad range of fasteners from 3/8” to 1 3/8” pins. That’s 9 different sizes. In addition, the Grex P635 23 Gauge 1-3/8-Inch Length Headless [...]
The Hitachi NT65MA4 15 Gauge Angle Finish Nailer is suited for a wide number of projects, and features a new design from Hitachi. It will fire 15 gauge nails between 1 ¼ inch and 2 ½ inch long. It also has an built-in air duster that makes it easy to clear debris from your work surface. When you have the brad nailer positioned, you just press the switch, and the air duster clears the work area to give you perfect placement.
The Hitachi Finish Nailer also has an adjustable, tool-free DOD, and the selective actuation reduces your downtime, supplying convenience for the user. It has a durable and lightweight aluminum housing.
The Hitachi Finish Nailer is meant for use in finish carpentry, installing door and window casings, base and crown moldings, cabinets chair rails, and exterior trim easily. It is also useful and performs perfectly well on exterior trim.
The Hitachi NT65MA4 15 Gauge Angle Finish [...]
